TBoat20-A Single-Beam Survey: CORS, Survey Lines and Export

What this video shows

This TBoat20-A demonstration follows a project from startup to export. It shows how correction access, navigation and sounder acquisition fit into the operator workflow. A successful connection in this recording does not establish compatibility with every CORS network; confirm service access and correction messages for your project.

Video chapters and operating notes

1. 00:08 Start the vessel

   Power on the USV and connect the control application.

2. 00:30 Create and configure a project

   Set the project parameters to match the required coordinate system and deliverable.

3. 00:52 Connect the correction service

   The recording shows the CORS connection workflow. Service credentials are obscured in the source video; availability must be checked for your location.

4. 01:10 Define survey lines

   Draw the working area, adjust line spacing and set a suitable home point.

5. 01:38 Run and monitor the mission

   Follow the vessel and the live mission view during the survey.

6. 02:00 Process and export

   The software demonstrates the processing view and output settings. Choose the format and reference system required by the recipient.

Before specifying your equipment

Specify minimum and maximum depth, the area to be covered and whether you need sections, a terrain grid or another deliverable. Keep original acquisition files alongside processed exports and check how water level, sound velocity and positioning corrections are handled.