01
Designed for the role
TAG66 is designed as a electric-steering-wheel autonomous guidance system for precision agriculture.
MACHINE CONTROL & PRECISION AGRICULTURE
TAG66 Machine Control & Precision Agriculture
TAG66 is a TOKNAV electric-steering-wheel autonomous guidance system for precision agriculture for professional field workflows. The page presents the key published values and application context available for this model.
- Pass-precision condition
- Less than 2.5 cm stated at 0.15–25 km/h
- GNSS RTK accuracy
- Horizontal ±(8 mm + 1 ppm); vertical ±(15 mm + 1 ppm)
- Steering motor
- 7.5 N·m rated torque; 180 RPM
- Receiver and display protection
- Receiver IP69K; display IP65
- Product information
- Configuration support
- Electric-steering-wheel Autonomous Guidance System For Precision Agriculture
For a useful recommendation, include your country, project application and any required integration.
MODELTAG66TOKNAV
PRODUCT TYPEMachine Control & Precision AgricultureProduct information
NEXT STEPReviewConfiguration
PRODUCT DECISION PATH
Start with the TAG66 application, then define the configuration.
This page keeps the product decision focused on a verified model record, its intended application and the project details needed for a useful recommendation.
02
Pass-precision condition
Published product information lists Less than 2.5 cm stated at 0.15–25 km/h.
03
GNSS RTK accuracy
Published product information lists Horizontal ±(8 mm + 1 ppm); vertical ±(15 mm + 1 ppm).
04
Configuration support
TOKNAV can help confirm compatible equipment, destination-market requirements and the intended project workflow.
FIELD WORKFLOW
A practical TAG66 workflow.
The steps below explain the operating decision path. Project procedures, safety requirements and final acceptance criteria remain the responsibility of the project team.
- 01
Set up machine and field data
Confirm machine fitment, design or guidance data, correction source and the required working parameters.
- 02
Calibrate and operate
Follow the documented setup and operating method while checking the machine, sensors and site conditions.
- 03
Review the work record
Check the recorded path or completed work against the project procedure before the next pass or handover.
PRODUCT DOCUMENTATION
TAG66 information, verified against official product documentation.
Technical documents
Available product documents are listed in the downloads section where supplied.
Configuration support
Contact TOKNAV to confirm the configuration required for your project.
Before ordering
Confirm detailed values, scope of supply, required options and regional availability with TOKNAV for your project.
CONFIGURE FOR THE PROJECT
Match TAG66 to the actual field workflow.
A model name is only the starting point. A useful configuration considers the work method, output, integration, country of use and available supporting equipment.
Confirm the application
Define the project task and operating environment before selecting accessories or options.
Confirm the field system
Review compatibility with any receiver, controller, software, vessel, machine or workflow already in use.
Request a configuration
Send the destination country and project requirement for a focused product recommendation.
PRODUCT RECORD
- Model: TAG66
- Category: Machine Control & Precision Agriculture
- Status: Current product information
LATEST ENGLISH DOCUMENTS
Download TAG66 technical documents.
These are the current English files selected by model and supplied file date. Open a document to review it, or save it for your project file.
VERIFIED TECHNICAL SUMMARY
TAG66 key technical data.
Values in this section were checked against the newest supplied English product document named on this page. Conditions shown in that document are retained here where relevant.
Product role+
- Intended role
- Electric-steering-wheel Autonomous Guidance System For Precision Agriculture
- Technical information
- Published product information for this model
Verified technical data+
- Pass-precision condition
- Less than 2.5 cm stated at 0.15–25 km/h
- GNSS RTK accuracy
- Horizontal ±(8 mm + 1 ppm); vertical ±(15 mm + 1 ppm)
- Steering motor
- 7.5 N·m rated torque; 180 RPM
- Receiver and display protection
- Receiver IP69K; display IP65
Before ordering+
- System fit
- Confirm compatibility with the intended project system
- Destination and use
- Confirm regional availability, operating conditions and required approvals
Before orderingConfirm the final configuration, scope of supply, destination-market suitability and any project-specific integration requirement with TOKNAV.
DOCUMENTATION & PRODUCT RECORD
TAG66 product record
The record below summarises the model, product category and published technical information.
Model & Product Category+
- Model
- TAG66
- Product category
- Machine Control & Precision Agriculture
- Product role
- Electric-steering-wheel Autonomous Guidance System For Precision Agriculture
Technical informationTechnical specifications are based on the latest available product documentation. Contact TOKNAV to confirm the configuration required for your project.
APPLICATION PATHS
Where TAG66 fits into a project conversation.
These application paths help identify the relevant field workflow and the next product discussion.
Precision agriculture
Discuss the Precision agriculture workflow and the role of TAG66 in the intended project.
Land levelling
Discuss the Land levelling workflow and the role of TAG66 in the intended project.
Machine guidance
Discuss the Machine guidance workflow and the role of TAG66 in the intended project.
Construction earthworks
Discuss the Construction earthworks workflow and the role of TAG66 in the intended project.
BUYER QUESTIONS
Before you choose a configuration.
These answers help start the right technical discussion without overstating information that needs project-level confirmation.
Start a TAG66 enquiryWhere are the published TAG66 values shown?
The technical summary on this page lists the published values selected for this model. Available documents can be found in the downloads section.
How should TAG66 be specified for a project?
Share the country of use, application, operating conditions, intended workflow and connected equipment. TOKNAV can then help identify a suitable configuration.
Can the same configuration be used in every market?
Not necessarily. Communication options, enabled functions, accessories, local rules and project integration can vary. Confirm the final configuration before purchase or deployment.
PROJECT ENQUIRY
Need a TAG66 configuration for a live project?
Share the location, application, expected workflow and existing system. TOKNAV can help move from the product record to a project-ready configuration discussion.