01
Green-laser measurement support
The current T50 brochure specifies a 100 m green laser. For measurement within 5 m, it specifies 3D position error of no more than 2.5 cm.
GNSS RTK RECEIVER
T50 GNSS RTK Receiver
T50 is a professional GNSS RTK receiver for survey and layout teams that need IMU tilt measurement, AR stakeout and green-laser measurement support in a compact IP68 field unit.
- GNSS channels
- 1408
- Green laser range
- 100 m
- IMU tilt
- <2 cm at <60°
- Field protection
- IP68 · 770 g
- Product information
- Configuration support
- GNSS positioning equipment for professional field workflows
For a useful recommendation, include your country, project application and any required integration.
MODELT50TOKNAV
PRODUCT TYPEGNSS RTK ReceiverProduct information
NEXT STEPReviewConfiguration
PRODUCT DECISION PATH
Start with the T50 application, then define the configuration.
This page keeps the product decision focused on a verified model record, its intended application and the project details needed for a useful recommendation.
02
IMU tilt measurement
The supplied specification states tilt measurement accuracy of less than 2 cm within a tilt angle below 60° for field collection and stakeout workflows.
03
Integrated field communications
The documented connectivity set includes 4G, Wi-Fi, Bluetooth and an integrated 410–470 MHz UHF radio. Confirm regional radio configuration before ordering.
04
AR stakeout workflow
AR stakeout is listed in the current product record to help an operator relate a design point to the field environment.
FIELD WORKFLOW
A practical T50 workflow.
The steps below explain the operating decision path. Project procedures, safety requirements and final acceptance criteria remain the responsibility of the project team.
- 01
Prepare control and correction
Set the project coordinate system and correction path before collecting or staking points.
- 02
Measure or capture the point
Use the documented GNSS, IMU and laser functions appropriate to the site condition and point accessibility.
- 03
Review and deliver
Check the field result in the selected survey software and retain the job record with the required project documentation.
PRODUCT DOCUMENTATION
T50 information, verified against official product documentation.
Technical documents
Available product documents are listed in the downloads section where supplied.
Configuration support
Contact TOKNAV to confirm the configuration required for your project.
Before ordering
Confirm detailed values, scope of supply, required options and regional availability with TOKNAV for your project.
CONFIGURE FOR THE PROJECT
Match T50 to the actual field workflow.
A model name is only the starting point. A useful configuration considers the work method, output, integration, country of use and available supporting equipment.
Confirm the application
Define the project task and operating environment before selecting accessories or options.
Confirm the field system
Review compatibility with any receiver, controller, software, vessel, machine or workflow already in use.
Request a configuration
Send the destination country and project requirement for a focused product recommendation.
PRODUCT RECORD
- Model: T50
- Category: GNSS RTK Receiver
- Status: Current product information
LATEST ENGLISH DOCUMENTS
Download T50 technical documents.
These are the current English files selected by model and supplied file date. Open a document to review it, or save it for your project file.
VERIFIED TECHNICAL SUMMARY
T50 key technical data.
Values in this section were checked against the newest supplied English product document named on this page. Conditions shown in that document are retained here where relevant.
GNSS positioning+
- Channels
- 1408
- RTK accuracy
- Horizontal ±(8 mm + 1 ppm); vertical ±(15 mm + 1 ppm)
- IMU tilt accuracy
- Less than 2 cm within a tilt angle below 60°
Laser and field functions+
- Green laser range
- 100 m
- Laser 3D position error
- No more than 2.5 cm within 5 m
- Workflow functions
- AR stakeout; 8 GB internal storage
Communications, power and environment+
- Connections
- 4G, Wi-Fi, Bluetooth, integrated 410–470 MHz UHF radio
- Battery
- 7.4 V, 6500 mAh; over 16 h stated for controller-network mode
- Protection and size
- IP68; 770 g; Φ132 × 83 mm; −30 °C to +65 °C; 1.5 m drop resistance
Before orderingConfirm the final configuration, scope of supply, destination-market suitability and any project-specific integration requirement with TOKNAV.
DOCUMENTATION & PRODUCT RECORD
T50 product record
The record below summarises the model, product category and published technical information.
Model & Product Category+
- Model
- T50
- Product category
- GNSS RTK Receiver
- Product role
- GNSS positioning equipment for professional field workflows
Technical informationTechnical specifications are based on the latest available product documentation. Contact TOKNAV to confirm the configuration required for your project.
APPLICATION PATHS
Where T50 fits into a project conversation.
These application paths help identify the relevant field workflow and the next product discussion.
Surveying & mapping
Discuss the Surveying & mapping workflow and the role of T50 in the intended project.
Construction layout
Discuss the Construction layout workflow and the role of T50 in the intended project.
Control-point work
Discuss the Control-point work workflow and the role of T50 in the intended project.
BUYER QUESTIONS
Before you choose a configuration.
These answers help start the right technical discussion without overstating information that needs project-level confirmation.
Start a T50 enquiryWhen is the T50 green laser useful?
The laser function is intended for points that are difficult to reach directly with a pole. Assess line of sight, surface condition and the documented measurement range before using it for the field task.
Can T50 be supplied for a UHF radio workflow?
The latest brochure lists an integrated 410–470 MHz UHF radio. Share the destination country and local radio requirement so the final configuration can be checked before supply.
What should a T50 enquiry include?
Provide the country, correction source, survey or layout task, requested software and whether laser or AR stakeout is required.
PROJECT ENQUIRY
Need a T50 configuration for a live project?
Share the location, application, expected workflow and existing system. TOKNAV can help move from the product record to a project-ready configuration discussion.