01
Designed for the role
U6 is designed as a GNSS monitoring all-in-one unit for geological and infrastructure observation.
DEFORMATION MONITORING EQUIPMENT
U6 Deformation Monitoring Equipment
U6 is a TOKNAV GNSS monitoring all-in-one unit for geological and infrastructure observation for professional field workflows. The page presents the key published values and application context available for this model.
- RTK accuracy
- Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm
- Integrated sensors
- Three-axis accelerometer ±6 g; inclination ±90°; barometer
- Communications and storage
- 4G full network, Wi-Fi, Bluetooth, LoRa; 32 GB storage
- Power and protection
- 9–36 V DC; 1.8 W; IP68; 2.1 kg maximum
- Product information
- Configuration support
- GNSS Monitoring All-in-one Unit For Geological And Infrastructure Observation
For a useful recommendation, include your country, project application and any required integration.
MODELU6TOKNAV
PRODUCT TYPEDeformation Monitoring EquipmentProduct information
NEXT STEPReviewConfiguration
PRODUCT DECISION PATH
Start with the U6 application, then define the configuration.
This page keeps the product decision focused on a verified model record, its intended application and the project details needed for a useful recommendation.
02
RTK accuracy
Published product information lists Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm.
03
Integrated sensors
Published product information lists Three-axis accelerometer ±6 g; inclination ±90°; barometer.
04
Configuration support
TOKNAV can help confirm compatible equipment, destination-market requirements and the intended project workflow.
FIELD WORKFLOW
A practical U6 workflow.
The steps below explain the operating decision path. Project procedures, safety requirements and final acceptance criteria remain the responsibility of the project team.
- 01
Define the monitoring design
Confirm site geometry, power, communications, sensors, sampling interval and alert responsibility before installation.
- 02
Install and verify the system
Check the documented interfaces, environmental requirements and data path as part of the site commissioning process.
- 03
Maintain the observation record
Use a project-defined review and escalation procedure for data, system condition and maintenance.
PRODUCT DOCUMENTATION
U6 information, verified against official product documentation.
Technical documents
Available product documents are listed in the downloads section where supplied.
Configuration support
Contact TOKNAV to confirm the configuration required for your project.
Before ordering
Confirm detailed values, scope of supply, required options and regional availability with TOKNAV for your project.
CONFIGURE FOR THE PROJECT
Match U6 to the actual field workflow.
A model name is only the starting point. A useful configuration considers the work method, output, integration, country of use and available supporting equipment.
Confirm the application
Define the project task and operating environment before selecting accessories or options.
Confirm the field system
Review compatibility with any receiver, controller, software, vessel, machine or workflow already in use.
Request a configuration
Send the destination country and project requirement for a focused product recommendation.
PRODUCT RECORD
- Model: U6
- Category: Deformation Monitoring Equipment
- Status: Current product information
LATEST ENGLISH DOCUMENTS
Download U6 technical documents.
These are the current English files selected by model and supplied file date. Open a document to review it, or save it for your project file.
VERIFIED TECHNICAL SUMMARY
U6 key technical data.
Values in this section were checked against the newest supplied English product document named on this page. Conditions shown in that document are retained here where relevant.
Product role+
- Intended role
- GNSS Monitoring All-in-one Unit For Geological And Infrastructure Observation
- Technical information
- Published product information for this model
Verified technical data+
- RTK accuracy
- Horizontal 8 mm + 1 ppm; vertical 15 mm + 1 ppm
- Integrated sensors
- Three-axis accelerometer ±6 g; inclination ±90°; barometer
- Communications and storage
- 4G full network, Wi-Fi, Bluetooth, LoRa; 32 GB storage
- Power and protection
- 9–36 V DC; 1.8 W; IP68; 2.1 kg maximum
Before ordering+
- System fit
- Confirm compatibility with the intended project system
- Destination and use
- Confirm regional availability, operating conditions and required approvals
Before orderingConfirm the final configuration, scope of supply, destination-market suitability and any project-specific integration requirement with TOKNAV.
DOCUMENTATION & PRODUCT RECORD
U6 product record
The record below summarises the model, product category and published technical information.
Model & Product Category+
- Model
- U6
- Product category
- Deformation Monitoring Equipment
- Product role
- GNSS Monitoring All-in-one Unit For Geological And Infrastructure Observation
Technical informationTechnical specifications are based on the latest available product documentation. Contact TOKNAV to confirm the configuration required for your project.
APPLICATION PATHS
Where U6 fits into a project conversation.
These application paths help identify the relevant field workflow and the next product discussion.
Deformation monitoring
Discuss the Deformation monitoring workflow and the role of U6 in the intended project.
Geological hazard observation
Discuss the Geological hazard observation workflow and the role of U6 in the intended project.
Infrastructure monitoring
Discuss the Infrastructure monitoring workflow and the role of U6 in the intended project.
Remote condition reporting
Discuss the Remote condition reporting workflow and the role of U6 in the intended project.
BUYER QUESTIONS
Before you choose a configuration.
These answers help start the right technical discussion without overstating information that needs project-level confirmation.
Start a U6 enquiryWhere are the published U6 values shown?
The technical summary on this page lists the published values selected for this model. Available documents can be found in the downloads section.
How should U6 be specified for a project?
Share the country of use, application, operating conditions, intended workflow and connected equipment. TOKNAV can then help identify a suitable configuration.
Can the same configuration be used in every market?
Not necessarily. Communication options, enabled functions, accessories, local rules and project integration can vary. Confirm the final configuration before purchase or deployment.
PROJECT ENQUIRY
Need a U6 configuration for a live project?
Share the location, application, expected workflow and existing system. TOKNAV can help move from the product record to a project-ready configuration discussion.