01
Professional RTK positioning
The current T50basic record lists 1408 GNSS channels and RTK horizontal accuracy of ±(8 mm + 1 ppm).
GNSS RTK RECEIVER
T50basic GNSS RTK Receiver
T50basic is a compact GNSS RTK receiver for conventional survey and stakeout workflows that require 1408-channel positioning, IMU tilt measurement and AR guidance.
- GNSS channels
- 1408
- IMU tilt
- <2 cm at <60°
- RTK accuracy
- ±(8 mm + 1 ppm) H
- Field protection
- IP68 · 770 g
- Product information
- Configuration support
- GNSS positioning equipment for professional field workflows
For a useful recommendation, include your country, project application and any required integration.
MODELT50basicTOKNAV
PRODUCT TYPEGNSS RTK ReceiverProduct information
NEXT STEPReviewConfiguration
PRODUCT DECISION PATH
Start with the T50basic application, then define the configuration.
This page keeps the product decision focused on a verified model record, its intended application and the project details needed for a useful recommendation.
02
IMU tilt workflow
The supplied source states tilt measurement accuracy of less than 2 cm within a tilt angle below 60°.
03
AR stakeout
AR stakeout is part of the product record to support field point-location guidance.
04
Compact protected hardware
The brochure lists IP68 protection, 1.5 m drop resistance, 770 g mass and 7.4 V 6500 mAh battery.
FIELD WORKFLOW
A practical T50basic workflow.
The steps below explain the operating decision path. Project procedures, safety requirements and final acceptance criteria remain the responsibility of the project team.
- 01
Prepare the field system
Confirm project coordinate system, correction source, software and any radio requirements.
- 02
Collect or stake
Use conventional RTK measurement or IMU tilt according to point accessibility and field procedure.
- 03
Check and retain results
Review the field result before export and maintain the job record required by the project.
PRODUCT DOCUMENTATION
T50basic information, verified against official product documentation.
Technical documents
Available product documents are listed in the downloads section where supplied.
Configuration support
Contact TOKNAV to confirm the configuration required for your project.
Before ordering
Confirm detailed values, scope of supply, required options and regional availability with TOKNAV for your project.
CONFIGURE FOR THE PROJECT
Match T50basic to the actual field workflow.
A model name is only the starting point. A useful configuration considers the work method, output, integration, country of use and available supporting equipment.
Confirm the application
Define the project task and operating environment before selecting accessories or options.
Confirm the field system
Review compatibility with any receiver, controller, software, vessel, machine or workflow already in use.
Request a configuration
Send the destination country and project requirement for a focused product recommendation.
PRODUCT RECORD
- Model: T50basic
- Category: GNSS RTK Receiver
- Status: Current product information
LATEST ENGLISH DOCUMENTS
Download T50basic technical documents.
These are the current English files selected by model and supplied file date. Open a document to review it, or save it for your project file.
VERIFIED TECHNICAL SUMMARY
T50basic key technical data.
Values in this section were checked against the newest supplied English product document named on this page. Conditions shown in that document are retained here where relevant.
GNSS positioning+
- Channels
- 1408
- RTK accuracy
- Horizontal ±(8 mm + 1 ppm); vertical ±(15 mm + 1 ppm)
- IMU tilt accuracy
- Less than 2 cm within a tilt angle below 60°
System and communications+
- Workflow functions
- AR stakeout; 8 GB internal storage
- Connections
- 4G, Wi-Fi, Bluetooth and integrated 410–470 MHz UHF radio
- Radio note
- Confirm local radio rules and final configuration before ordering
Power and environment+
- Battery
- 7.4 V, 6500 mAh; over 16 h stated for controller-network mode
- Protection
- IP68; 1.5 m drop resistance
- Size and mass
- Φ132 × 83 mm; 770 g; −30 °C to +65 °C
Before orderingConfirm the final configuration, scope of supply, destination-market suitability and any project-specific integration requirement with TOKNAV.
DOCUMENTATION & PRODUCT RECORD
T50basic product record
The record below summarises the model, product category and published technical information.
Model & Product Category+
- Model
- T50basic
- Product category
- GNSS RTK Receiver
- Product role
- GNSS positioning equipment for professional field workflows
Technical informationTechnical specifications are based on the latest available product documentation. Contact TOKNAV to confirm the configuration required for your project.
APPLICATION PATHS
Where T50basic fits into a project conversation.
These application paths help identify the relevant field workflow and the next product discussion.
Surveying & mapping
Discuss the Surveying & mapping workflow and the role of T50basic in the intended project.
Construction layout
Discuss the Construction layout workflow and the role of T50basic in the intended project.
Control-point work
Discuss the Control-point work workflow and the role of T50basic in the intended project.
BUYER QUESTIONS
Before you choose a configuration.
These answers help start the right technical discussion without overstating information that needs project-level confirmation.
Start a T50basic enquiryWhat distinguishes the T50basic field workflow?
The documented record centers on 1408-channel RTK positioning, IMU tilt measurement and AR stakeout. Review any laser or image-survey requirement against the appropriate product model before selection.
What is the documented T50basic protection rating?
The latest English source lists IP68 protection and 1.5 m drop resistance. Always follow the project operating procedure and check the final supplied configuration.
How can I request a T50basic configuration?
Include the country, intended application, correction source, software, radio requirement and any accessories already in use.
PROJECT ENQUIRY
Need a T50basic configuration for a live project?
Share the location, application, expected workflow and existing system. TOKNAV can help move from the product record to a project-ready configuration discussion.