01
Designed for the role
TCA930M is designed as a mini 3D choke-ring GNSS antenna for base and monitoring systems.
GNSS ANTENNA
TCA930M GNSS Antenna
TCA930M is a TOKNAV mini 3D choke-ring GNSS antenna for base and monitoring systems for professional field workflows. The page presents the key published values and application context available for this model.
- Signal coverage
- GPS, GLONASS, Galileo, BDS, QZSS, SBAS, NavIC and L-Band
- LNA gain
- 50 dB ±2 dB
- Size and connector
- Ø185 × 148 mm; TNC female
- Phase-center repeatability
- Less than 1 mm; 2.5 kg maximum
- Product information
- Configuration support
- Mini 3D Choke-ring GNSS Antenna For Base And Monitoring Systems
For a useful recommendation, include your country, project application and any required integration.
MODELTCA930MTOKNAV
PRODUCT TYPEGNSS AntennaProduct information
NEXT STEPReviewConfiguration
PRODUCT DECISION PATH
Start with the TCA930M application, then define the configuration.
This page keeps the product decision focused on a verified model record, its intended application and the project details needed for a useful recommendation.
02
Signal coverage
Published product information lists GPS, GLONASS, Galileo, BDS, QZSS, SBAS, NavIC and L-Band.
03
LNA gain
Published product information lists 50 dB ±2 dB.
04
Configuration support
TOKNAV can help confirm compatible equipment, destination-market requirements and the intended project workflow.
FIELD WORKFLOW
A practical TCA930M workflow.
The steps below explain the operating decision path. Project procedures, safety requirements and final acceptance criteria remain the responsibility of the project team.
- 01
Match antenna and receiver
Confirm supported signals, connector, power and cable arrangement against the exact receiver and installation plan.
- 02
Install at the approved location
Use the documented mounting method and protect the antenna, connector and cable from the site environment.
- 03
Verify the signal path
Check signal tracking and project data output after installation; final performance depends on siting and the complete system.
PRODUCT DOCUMENTATION
TCA930M information, verified against official product documentation.
Technical documents
Available product documents are listed in the downloads section where supplied.
Configuration support
Contact TOKNAV to confirm the configuration required for your project.
Before ordering
Confirm detailed values, scope of supply, required options and regional availability with TOKNAV for your project.
CONFIGURE FOR THE PROJECT
Match TCA930M to the actual field workflow.
A model name is only the starting point. A useful configuration considers the work method, output, integration, country of use and available supporting equipment.
Confirm the application
Define the project task and operating environment before selecting accessories or options.
Confirm the field system
Review compatibility with any receiver, controller, software, vessel, machine or workflow already in use.
Request a configuration
Send the destination country and project requirement for a focused product recommendation.
PRODUCT RECORD
- Model: TCA930M
- Category: GNSS Antenna
- Status: Current product information
LATEST ENGLISH DOCUMENTS
Download TCA930M technical documents.
These are the current English files selected by model and supplied file date. Open a document to review it, or save it for your project file.
VERIFIED TECHNICAL SUMMARY
TCA930M key technical data.
Values in this section were checked against the newest supplied English product document named on this page. Conditions shown in that document are retained here where relevant.
Product role+
- Intended role
- Mini 3D Choke-ring GNSS Antenna For Base And Monitoring Systems
- Technical information
- Published product information for this model
Verified technical data+
- Signal coverage
- GPS, GLONASS, Galileo, BDS, QZSS, SBAS, NavIC and L-Band
- LNA gain
- 50 dB ±2 dB
- Size and connector
- Ø185 × 148 mm; TNC female
- Phase-center repeatability
- Less than 1 mm; 2.5 kg maximum
Before ordering+
- System fit
- Confirm compatibility with the intended project system
- Destination and use
- Confirm regional availability, operating conditions and required approvals
Before orderingConfirm the final configuration, scope of supply, destination-market suitability and any project-specific integration requirement with TOKNAV.
DOCUMENTATION & PRODUCT RECORD
TCA930M product record
The record below summarises the model, product category and published technical information.
Model & Product Category+
- Model
- TCA930M
- Product category
- GNSS Antenna
- Product role
- Mini 3D Choke-ring GNSS Antenna For Base And Monitoring Systems
Technical informationTechnical specifications are based on the latest available product documentation. Contact TOKNAV to confirm the configuration required for your project.
APPLICATION PATHS
Where TCA930M fits into a project conversation.
These application paths help identify the relevant field workflow and the next product discussion.
GNSS base stations
Discuss the GNSS base stations workflow and the role of TCA930M in the intended project.
Survey and monitoring
Discuss the Survey and monitoring workflow and the role of TCA930M in the intended project.
Vehicle and UAV integration
Discuss the Vehicle and UAV integration workflow and the role of TCA930M in the intended project.
Marine and infrastructure positioning
Discuss the Marine and infrastructure positioning workflow and the role of TCA930M in the intended project.
BUYER QUESTIONS
Before you choose a configuration.
These answers help start the right technical discussion without overstating information that needs project-level confirmation.
Start a TCA930M enquiryWhere are the published TCA930M values shown?
The technical summary on this page lists the published values selected for this model. Available documents can be found in the downloads section.
How should TCA930M be specified for a project?
Share the country of use, application, operating conditions, intended workflow and connected equipment. TOKNAV can then help identify a suitable configuration.
Can the same configuration be used in every market?
Not necessarily. Communication options, enabled functions, accessories, local rules and project integration can vary. Confirm the final configuration before purchase or deployment.
PROJECT ENQUIRY
Need a TCA930M configuration for a live project?
Share the location, application, expected workflow and existing system. TOKNAV can help move from the product record to a project-ready configuration discussion.